How is the Versah C-Guide System different from other guided surgery systems?

1. Its Keyless, the operator does not need to hold a separate key during surgery. The vertical stop attaches to the Densah Bur providing the key function to simplify the operation 
2. The C shaped hole in the C-Guide sleeve allows more optimal irrigation flow to the site. 
3. The Versah G-Stop can be used as a vertical stop to help control vertical depth. 
4. Traditional guided surgery systems rely on the drill press concept with very low tolerances between the drill diameter and the sleeve diameter. This system allows clinicians only one pass in and one pass out when drilling. This method will not work with Osseodensification. For Osseodensification with guided surgery, the clinician should have the appropriate space between the drill diameter and the sleeve diameter. The C-Guide Sleeve is designed to be slightly larger than the G-Stop Key, which allows  freely the pumping action of the Densah Bur. In addition, the buccal opening of the C-Guide sleeve plus the G-Stop key vertical slots allow for adequate irrigation to the site 

What has changed with the new C-Guide System from the previous version?

Some of the changes we are excited to introduce in our new Guided Surgery System:

• A better precise fit between the G-Stop Keys and C-Guide Sleeve
• Autoclavable, reusable metal G-Stop Keys
• Compatibility with most surgical implant handpieces (including W&H WS-75, WI-75)
• Provide operating depth ranging from 3mm up to 15mm when used without the C-Guide Sleeve
• The ability to reach depths from 2mm up to 14 mm when used with the C-Guide Sleeve in a surgical guide
• Color-coded each of the four diameter sizes, for easy differentiation between our S, M, L, and XL C-Guide Sleeves and matching G-Stop Key

How much is the whole kit?
Versah Guided Surgery Kit contains all pieces of Densah Bur Kit with Regular and Short Lengths, Parallel Pins, and Tapered Pilot Drills, all 28 G-Stop Keys (7 drilling depths for each diameter: (S, M, L, XL), 8 G-Stop Vertical Gauges (2 of each diameter: S, M, L, & XL), G-Stop Holder for storage of the Guided Surgery System, and Versah drill extender. The complete system is available for $4540.

Do I need to buy the full kit, or can I buy them individually?

The C-Guide Sleeves, G-Stop Vertical Gauges and G-Stop Keys can be ordered a la carte, just follow our work flowchart above (“Getting Started with Versah C-Guide System”). When purchasing Guided Surgery components for a specific case, we recommend following the implant diameter to ensure the right sizes required are received.

Our Client Satisfaction Team would also be happy to assist you with identifying exactly which sizes would be recommended for a specific case. Our Team is at your disposal at 844-711-5585 or sales@versah.com.

Each G-Stop Vertical Gauge is sold individually at $18 each (single use), the G-Stop Keys are sold individually at $49 each (reusable), and the G-Stop Holder is $170.

Are there special Densah Burs for Versah Guided Surgery?
No, your existing G3 Tapered Pilot and G3 Densah Burs are compatible with Versah Guided Surgery System. All Densah Burs purchased after January 17, 2019 are part of our Third Generation (G3). G3 Densah Burs will also contain the “G3” designation on the shank of the Densah Bur, next to the lot number.